USB to Serial Micro Converter

990.004 USB to Serial Micro Converter

This is a very compact board for USB to TTL Serial conversion. Based on the popular and powerful FTDI FT232 chip, you can find drivers for all of the most common Operative Systems. The module works on 5.0V and 3.3V systems, pin 7, 8 and 9 are used for voltage setting. All the most used signal pins are available, a useful TX Enable pin is available for RS485 or similar networks. Two useful LEDs allow constant monitoring of the TX and RX signals, useful for fast troubleshooting. You can connect the Board in several methods, some useful headers are included in the kit. You can also solder the wires directly to the needed pins. Soldering two 9 pin headers (included) the module can be used as a 2x9 DIL chip on standard breadboards and perfboards. Simply connect the device to a computer, install the proper drivers and a virtual serial port will be available on your system.

Technical Specifications:

• FT232RL - FTDI: versatile and powerful conversion chip.
• Serial Levels: 3.3V or 5.0V selectable
• USB Plug: Mini B
• USB Standard: 1.1 and 2.0 compliant
• 5V OUT - Output Power: about 300 mA available from the USB Bus.
• Dimensions: 18 x 25mm - max height 8 mm

Features:

• TX and RX LEDs to monitor Serial activity
• 3.3V and 5V serial levels
• DIL form factor to use the Board on Bread Boards or other 2.54mm pitch standard boards
• 5 pin 2.54mm pitch front connector for easy and fast connection
• Compact Size ideal for prototype or production
• Hardware Handshaking full supported

Drivers and Documentation:

Datasheet (200KB)



LINK FTDI Website (FT232R)