This small, light ball caster uses a 3/8" diameter plastic ball. The height of the assembled kit ranges from 0.4" to 0.6".
Overview
This ball caster kit includes a black ABS housing, a 3/8" diameter plastic ball, two spacers (1/16" and 1/8" thick), and two #2 screw sets. The total height of the ball caster, 0.4", can be increased to about 0.6" using the included spacers. The two included #2 screws can be used to mount the ball caster to your chassis (the distance between the screw holes is 0.53").
Note that our ball casters are designed for small robots; they are not intended to bear more than a few pounds. With more weight than this, friction between the ball and the housing will probably keep it from rolling well.
Comparison of Pololu ball casters
|
Pololu ball caster
ball diameter |
height with
no spacers |
distance
between
screw holes |
weight with
no spacers
or screws |
|
3/8" plastic-ball |
0.40" |
0.53" |
0.03 oz |
|
|
0.40" |
0.53" |
0.14 oz |
|
|
0.53" |
0.58" |
0.07 oz |
|
|
0.53" |
0.58" |
0.32 oz |
|
|
0.91" |
0.24" |
0.25 oz |
|
|
0.83" |
0.61" |
1.05 oz |
|
|
1.10" |
0.70" |
0.36 oz |
===================================
Dimensions
General specifications
===================================
FAQs
How much weight can Pololu ball caster support?
Our ball casters are designed for small robots; they are not intended to bear more than a few pounds. With more weight than this, friction between the ball and the housing will probably keep it from rolling well.
No recommended products at the moment.
No recommended products at the moment.
