This compact bracket enables convenient mounting of popular,
Sanyo-style miniature metal gearmotors. Theblack plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. The brackets are sold in pairs, and each bracket comes with two
#2 screws and two
nuts.
These plastic mounting brackets allow you to easily and securely mount the ubiquitous 10 mm x 12 mm x 26 mm metal gearhead motors first popularized by Sanyo's 12GN series (e.g. NA1S…NA3S), such as our
micro metal gearmotors and the Solarbotics mini metal gear motors (GM12a,
GM13a,
GM14a, and
GM18). We offer these brackets in
black plastic and
white plastic, and we offer an
extended version that might work better for particular applications.
Four #2-56×7/16" screws and four
nuts are included.
 |
| Micro metal gearmotor mounted to a piece of clear acrylic with mounting bracket. |
|
 |
| Micro metal gearmotor mounted to a piece of clear acrylic with mounting bracket. |
|
These brackets have mounting holes that are very close to the output shaft end of the motor, which could cause mounting difficulties if your wheels have recessed hubs like the
Pololu Wheel 42 - 19 mm. For such applications we recommend the extended version of this bracket.
Note: This bracket also works with the
1000:1 micro metal gearmotors, but because of its longer gearbox, it does not fully enclose the exposed gears the way it does on the other micro metal gearmotors.
General specifications
No recommended products at the moment.
No recommended products at the moment.
